| Customization: | Available |
|---|---|
| Application: | Electronic, Instrument, Position Sensor, Audio, Lighting |
| Type: | Switchgears |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Low-voltage fixed divided switchgear with the international advanced horizontal interval combined low-voltage switchgear, by power distribution center (PC) and motor control center (MCC) two parts, used for AC 50Hz, rated operating voltage 660V and below three-phase distribution system.
The ambient air temperature should not be higher than +40 ° C or lower than -5 ° C, and the average temperature within 24 hours should not be higher than +35 ° C. If the temperature exceeds the limit, the capacity should be reduced according to the actual conditions.
For indoor use, the altitude of the use place shall not exceed 2000m.
The relative humidity of the surrounding air does not exceed 50% at the maximum temperature of +40 ° C, and a larger relative humidity is allowed at lower temperatures: such as 90% at +20 ° C, the effect of condensation that may occur occasionally due to changes in temperature should be taken into account.
The inclination of the vertical plane when the device is installed does not exceed 5%, and the whole group of cabinets is relatively flat.
The device shall be installed in a place free from violent vibration and shock and insufficient to cause undue corrosion of electrical components.
When the user has special requirements, it can be negotiated with the manufacturer.
Fixed divided switchgear
Power distribution Center (PC cabinet) and motor Control Center (MCC cabinet)
The cabinet is equipped with an independent PE grounding system and N neutral conductor
){kind=link}